FusionForge

Docker

From FusionForge Wiki
Revision as of 12:29, 4 May 2014 by Olberger (talk | contribs) (Creating a container: specify hostname)

Jump to: navigation, search

Creating a FusionForge development/tests environment using Docker containers

This HOWTO is meant to illustrate how Docker lightweight containers can be used to set-up a development and test environment for FusionForge, when it is complete.

This document is work in progress and is probably misleading in the current state, sorry.

The principle is to prepare an image of a Debian distribution containing an installation of PostgreSQL and Apache2 which can be used to create a container where FusionForge will be installed.

A similar setup can probably be achieved using other distribution packages.

Installing Docker on Debian testing/sid

Install the package (note that the 'docker' command is renamed in 'docker.io' to avoid conflict with a pre-existing package):

apt-get install docker.io
ln -s /usr/bin/docker.io /usr/local/bin/docker

If you already played with LXC/cgroups, make sure you remove your /sys/fs/cgroup entry from /etc/fstab, and let the cgroupfs-mount package take care of it, otherwise you'll get clear and informative errors such as:

[error] client.go:2329 Error getting size: bad file descriptor


Creating a base Debian stable image containing OpenSSH and runit

It is possible to achieve the same goal using different manual steps, but we will directly reuse a Debian variant of baseimage-docker, which provides all the necessary bits, in order to simulate a VM in a docker container.

Create Debian stable baseimage-docker image

See : https://github.com/olberger/baseimage-docker/tree/wheezy which contains a modified version of baseimage-docker for Debian. We'll use the stable/wheezy version.

git clone -b wheezy https://github.com/olberger/baseimage-docker 
cd baseimage-docker/image
sudo docker build -t=YOURUSER/baseimage-docker-debian:wheezy .

Build a Docker image for the fusionforge test suite

We will build a fusionforge image containing a similar setup as the one of the development VM.

Prepare the test suite image

Get a copy of the Dockerfile in obergix's repo and build the image

git clone -b docker https://fusionforge.org/anonscm/git/fusionforge/users/olberger.git
cd fusionforge/vm/docker
cp ../packer/scripts/fusionforge-source.sh ./
docker build -t=YOURUSER/fusionforge .

Creating a container

Use the dockerfile to create a container with something like :

$ docker run -t -d -p 2222:22 -p 8080:80 -p 4443:443 -h forge.internal YOURUSER/fusionforge

Voilà, FusionForge should then be installed and available at: https://localhost:4443/.

Forge configuration

Modify the host by editing /etc/gforge/config.ini.d/zzzz-local.ini to add :

[core]
web_host = localhost
https_port = 4443

The admin user's password can then be reset using:

root@2eebbd24093c:/usr/share/gforge# bin/forge_set_password admin whatever123

allowing you to login at https://localhost:4443/account/login.php?return_to=/ with user admin and password whatever123.


Saving the installation in a Docker image

At any time, the container which contains an installation of FusionForge can be saved as an image with the following (where 5.2.3-1 is the tag set to the value of the Debian package version in unstable):

$ docker commit 9060bc9d0b94 myfusionforge/ff-minimal:5.2.3-1

Note: it may be advisable to first stop apache2 and postgresql before saving the image... TO BE TESTED

A new container can then be created from that image, using something like:

$ docker run -t -d -p 2222:22 -p 8080:80 -p 4443:443 myfusionforge/ff-minimal:5.2.3-1 /usr/sbin/runsvdir-start

Sharing files between host and guest

To ease the process of testing changes on the guest, by directly modifying files from the host, it may be useful to share the contents of /usr/share/gforge between the host and guest.

This can be done, before installing fusionforge, by launching the PostgreSQL + Apache 2 container with something like :

$ docker run -v ~/docker/usr-share-gforge:/usr/share/gforge -t -d -p 2222:22 -p 8080:80 -p 4443:443 myfusionforge/sid_postgresql

This will install all fusionforge files so that they can be edited (sudo helps) directly from the host in ~/docker/usr-share-gforge

Troubleshootings / FIXME

Things to fix:

  • need to regen SSH keys, workaround:
sudo chroot /var/lib/docker/containers/6cf...gnagnagna.../root/
dpkg-reconfigure openssh-server
  • SSH key access is replaced by a password (why not), but sshd_config not updated (duh!), so comment out and restart openssh (how?) or commit/restart the container:
#PermitRootLogin without-password
  • gforge-db-postgresql failing during SQL initial replay, at first glance due to missing:
DEBIAN_FRONTEND=noninteractive