Difference between revisions of "Virtual machine development environment"

From FusionForge Wiki
Jump to: navigation, search
(CentOS variant: update to centos 7)
(CentOS variant: setup hostname)
Line 155: Line 155:
The above scripts also work for this VM.
The above scripts also work for this VM.
Properly set your hostname though:
echo ' forge.internal lists.forge.internal scm.forge.internal users.forge.internal' >> /etc/hosts
service nscd restart
== Modify the VM ==
== Modify the VM ==

Revision as of 14:46, 8 September 2015

We provide a 64-bit development/test Virtual Machine (aka FusionForge Sandbox) with an already configured automated tests environment. FusionForge is not pre-installed, it is packaged and installed using included automated scripts.

Dependencies : Vagrant and VirtualBox

To use the VM, please install Vagrant (>= v1.1).

By default Vagrant uses VirtualBox so install it too.

  • If you're running a recent Debian or Ubuntu, the following should work:
aptitude install vagrant virtualbox

Note: VirtualBox recently moved to the contrib section, so you need to enable it in your /etc/apt/sources.list, for instance by adding something like :

deb http://ftp.fr.debian.org/debian/ jessie main contrib

Make sure that you enabled hardware virtualization in your computer's BIOS, otherwise VirtualBox may not be able to run the VM.

See also use it with KVM if you want to extract the disk image from the .box.

Starting the VM with Vagrant

Note: installing the VM requires some free space (~700MB in your ~/.vagrant.d/ and ~1.5GB in ~/VirtualBox VMs).

  • Save this Vagrant configuration in a directory of your choice and rename it as Vagrantfile.
  • Edit the Vagrantfile if needed (e.g. if is already taken on your network)
  • In your host's /etc/hosts, add: forge.internal lists.forge.internal scm.forge.internal users.forge.internal
  • Go in the directory where the Vagrantfile was saved
cd {the directory you have chosen} 
  • Download, create and start the VM with:
vagrant up
  • You now can login without a password:
vagrant ssh -- -l root

If the VM doesn't start, try to launch the VirtualBox manager and start the VM manually: you'll have a more detailed error message.

Note: for an alternative with a NAT, cf. the tip alternative with port redirection below.

Building and installing FusionForge

This VM/appliance is basically a clean Debian system (jessie/stable), with a git clone/checkout of the FusionForge debian/6.0 code in /usr/src/fusionforge/. Make sure to update with:

cd /usr/src/fusionforge/
git pull

To build and install FusionForge, you just need to run helper scripts from the /usr/src/fusionforge/autoinstall/ directory, namely:

  • build.sh automatically builds FusionForge Debian (or RPM) packages from source, and stores them in a local package repository in /usr/src/debian-repository/.
  • install.sh installs these FusionForge packages.

You now have an up-to-date FusionForge running on http://forge.internal/ ! The fusionforge administrator's web login is admin, set the admin password with:

forge_set_password admin myadmin

Running the test suite

The VM is ready to run the functionnal test suite, which uses PHPUnit and Selenium to drive a controlled Web browser through various tests of the different features of the forge (hence functionnal tests), using its highest-level interface : its Web interface.

Note: you don't need to do this if you just want to test FusionForge. This is for running the test suite to ensure you didn't break anything when developping.

A couple other scripts run the test suite:

  • tests/func_tests.sh installs Selenium and runs the testsuite; use TESTGLOB='func/sometest/*' to limit the tests
  • install-gui.sh optionally sets up an X11 graphical environment.

There's also an icon on the VM's Desktop to run build.sh+install.sh, and another one for func_tests.sh.

Tests need around 25mn to complete, depending on the computing power of your machine. Failure screenshots are stored in /var/log/.

Running graphical programs remotely

If you don't want to install a full GUI on the VM (i.e. not using install-gui.sh), you can also run the interesting things remotely through SSH using

vagrant ssh -- -l root -X

Note that since Selenium needs an X11 display (as it drives a graphical web browser), you may then see the full graphical run of the test suite on your local X display in a new Firefox window.

You may prefer running the X display inside the VM to start the selenium server, so that windows opened by the tests don't bother you.

Headless run

func_tests-xvnc.sh runs the testsuite after setting up a fake VNC/X11 environment:

tests/func_tests-xvnc.sh deb/debian

Run only some tests

Use the TESTGLOB environment variable, e.g.:

TESTGLOB='func/50_PluginsScmGit/*' ./func_tests.sh deb/debian

Another example in headless mode:

TESTGLOB='func/30_RBAC/*' ./func_tests-xvnc.sh src/debian

Tips, Issues and FAQs

To reset the FusionForge admin password

forge_set_password admin yournewpassword

Accessing the web interface from host - alternative with port redirection

A bit more complicated than using an internal IP, but doesn't need a separate IP.

In the Vagrantfile, add:

config.vm.network :forwarded_port, guest: 80,  host: 8080
config.vm.network :forwarded_port, guest: 443, host: 8443

In /etc/fusionforge/config.ini.d/zzzz-local.ini, add:


And in your host's /etc/hosts, add: forge.internal lists.forge.internal scm.forge.internal users.forge.internal

Then hit http://forge.internal:8080/ !

Attention : the test suite might not work well in such a configuration

Using psql as root

su - postgres -c "psql -c 'CREATE ROLE root WITH LOGIN SUPERUSER'"

Use the development Git branch

If you want to use the latest development branch (to contribute to FusionForge or test the unreleased features), you can:

cd /usr/src/fusionforge/
git checkout debian/master

Note: if you switch back to an earlier version (e.g. from development back to stable), make sure you uninstall your FusionForge first because the packages won't be downgraded automatically:

rm -rf /usr/src/debian-repository/

Block outgoing e-mails

Useful if you're working on a database import with real user e-mails...

iptables -A OUTPUT -p tcp --dport 25 -j REJECT --reject-with tcp-reset

Using QEMU/KVM instead of VirtualBox

Converting from Virtualbox image format to QEMU qcow2

Converting from Virtualbox image format to QEMU qcow2: convert to raw format first

tar xf fusionforge-dev.box fusionforge-dev-disk1.vmdk
VBoxManage clonehd -format RAW fusionforge-dev-disk1.vmdk ffsandbox.raw  # ~10GB

Then optionaly convert to QCOW2 format:

qemu-img convert -f raw -O qcow2 ffsandbox.raw ffsandbox.qcow2

Running inside libvirt

  • Create a VM by importing the created qcow2 disk image, with virt-manager.
  • You may need to set manually the driver type to 'qcow2' in "disk" device section in the VM xml file (in /etc/libvirt/qemu/). In this case you need to redefine the VM xml file by: `sudo virsh -c qemu:///system define /etc/libvirt/qemu/ffsandbox.xml` then start the VM.
  • You need to reconfigure network interfaces in /etc/network/interfaces afterwards for replicating eth0 config stanza for eth1 for instance. You can find which device to enable by running ifconfig -a.
  • You may need to check the web_host setting in /etc/fusionforge/config.ini.d/debian-install.ini to adjust the forge's URLs for redirections.

CentOS variant

A version of the VM for CentOS 7 is available: http://fusionforge.fusionforge.org/sandbox/fusionforge-dev-centos7.box

The above scripts also work for this VM.

Properly set your hostname though:

echo ' forge.internal lists.forge.internal scm.forge.internal users.forge.internal' >> /etc/hosts
service nscd restart

Modify the VM

The VM is automatically generated from scratch using the Packer tool. See the Packer configuration in vm/packer/. One advantage of packer is its ability to create a VM with a disk of arbitrary size.

LXC / buildbot development environment

If you plan to test FusionForge under multiple distros and versions, you can reproduce the LXC setup used by our build bot on your computer.

It supports Debian 7 & 8 and CentOS 5, 6 & 7.

See Tools/BuildBot.